uPVC Window Price in India (2025): Complete Cost Breakdown & Factors

"How much do uPVC windows cost?" is the most common question we hear from homeowners. The short answer: ₹450–₹1,200 per square foot depending on 8 key variables. This guide breaks down every factor that affects pricing so you can plan your budget accurately and avoid overpaying.

uPVC Window Price Range by Type (2025)

Prices below include profile, glass, hardware, and basic installation for the Delhi NCR region. GST (18%) is additional.

8 Factors That Affect uPVC Window Pricing

1. Profile Brand & Wall Thickness

International brands (Veka, Rehau, Koemmerling) cost 15–25% more than domestic brands (Fenesta, Prominance, NCL). Class A profiles (2.8mm+ walls) cost more than Class B/C but last significantly longer. The premium pays for itself through reduced AC bills and zero maintenance.

2. Glass Type

Single clear glass is cheapest. Double-glazed units add ₹150–250/sq ft. Toughened glass adds ₹80–120/sq ft. Low-E (low emissivity) coated DGU for maximum thermal performance adds ₹200–350/sq ft. For most residential projects, standard DGU with 5mm+12mm gap+5mm provides the best cost-to-benefit ratio.

3. Hardware Grade

Economy hardware (₹800–1500/set) lasts 3–5 years. Premium hardware from Roto, Siegenia, or GU (₹2500–5000/set) lasts 15–20 years. Since hardware replacement requires dismounting the entire sash, spending more upfront avoids expensive service calls later.

4. Window Size & Configuration

Larger windows have lower per-sq-ft costs because the expensive components (hardware, locking mechanisms) are spread across more area. A 15 sq ft sliding window costs less per sq ft than a 6 sq ft casement window. Orders above 200 sq ft typically receive 5–10% volume discounts.

5. Colour & Finish

Standard white uPVC is cheapest. Laminated wood-grain finishes (walnut, oak, mahogany) add ₹100–200/sq ft. Dual-colour options (white inside, dark outside) add ₹150–250/sq ft. Custom RAL colours via foil-lamination add ₹200–300/sq ft.

6. Mesh/Mosquito Net Integration

Integrated sliding mesh tracks add ₹50–80/sq ft. Stainless steel security mesh (316 grade marine-quality) adds ₹200–350/sq ft. Retractable roller mesh adds ₹100–180 per opening.

7. Floor Height & Access

Installations above the 4th floor may incur additional charges (₹15–30/sq ft) for scaffolding, material hoisting, and safety equipment. Narrow staircases or no lift access in older buildings can also increase costs.

8. Old Window Removal & Civil Work

If you're replacing old wooden or aluminium windows, factor in ₹50–100/sq ft for removal, disposal, and minor civil repair (re-plastering, waterproofing). Some contractors include this in the quote; others charge separately. Always clarify upfront.

Sample Budget: 3BHK Flat in Noida (Typical)

How to Avoid Overpaying

• Get 3 quotes minimum — compare profile brand, glass spec, hardware brand, and warranty terms, not just the final number
• Ask for itemized pricing — reputable fabricators break down profile, glass, hardware, and installation costs separately
• Verify the profile — insist on seeing the profile cross-section and brand markings laser-printed on the frame
• Don't choose the cheapest quote — a ₹100/sq ft saving on profiles can cost ₹50,000+ in replacements within 5 years
• Check fabrication quality — visit the fabrication unit if possible; clean welds, proper reinforcement, and precise measurements are signs of quality